SABFOIL HARDWARE KIT WL950/WL1150/WL1350/WL1550/WL1750/WM999
€6.99*
Ready to ship, estimated delivery time: 2-5 workdays
Product information "SABFOIL HARDWARE KIT WL950/WL1150/WL1350/WL1550/WL1750/WM999 "
Flat Head Screw Hex M8x35 x 2
Flat Head Screw Hex M8x40 x 1
Screws to connect WL950/WL1150/WL1350/WL1550/WL1750 front wings to fuselage.
Customers also bought
Hardware Kit S325/S355/S375/S380/S395/S425/S430/S450/S480/S483 Flat Head Screws Torx M6x20 x 1 Flat Head Screws Torx M6x16 x 1 Screws to connect S325/S380/S425/S430/S450/S480/S483 stabilizers to fuselage.
Hardware Kit F663K/F703K/F753K/F903K/F1003K Flat Head Screws Hex M8x35 x 2 Conical Washers x 2 Hardware kit to connect F663K/F703K/F753K/F903K/F1003K fuselages to mast.
Hardware Kit Carbon Plate to Rail Board Flat Head Screws Hex M8x30 x 4 Truck Nuts M8 x 4 Hardware Kit to connect your carbon plate CP02K to Rail Boards (Kraken Modular System).
Sacrificial Anodes Replacement Kit Sacrificial Anode x 2 Cylindrical Head Screws M4x10 x 4 SystemKraken Modular System
Foam Pads for Plate Foam Pad x 5 Replacement set of foam pads to apply on your Kraken Modular System plate (P02K/CP02K).
Hardware Kit Plate/Mini Tuttle to Mast Cylindrical Head Screws M6x35 with Hexagon x 2 Washers 6x10x1 x 2 Torx Countersunk Head Screws M6X40 x 2 Use the two M6x35 cylindrical head screws together with the 6x10x1 washers to connect the Aluminum Plate (P02K) or the Mini Tuttle (T03K) to your mast.Use the two M6x40 torx countersunk head screws to connect the Carbon Plate (CP02K) to your mast.
Hardware Kit WT790/WT1100/WT1250/WM699/WM799 Flat Head Screws Hex M8x35 x 1 Flat Head Screws Hex M8x30 x 2 Screws to connect WT790/WT1100/WT1250/WM699/WM799 front wings fuselage.
WING FOILSURF FOILPUMP FOILFuselage 663 T8/R8MAIN SPECSLength: 663 mmFront Wing Conn. Type: T8Mast Conn. System: R8Recommended forWave - Freestyle - Freeride - Pumping - Surf - Dock-StartMast-Fuselage ConnectionKMSWing-Fuselage ConnectionT8Stabilizer-Fuselage ConnectionStandard663 mm aluminum fuselage, with T8 front wing connection type (big chord and M8 screws).The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant while maintaining performance.Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.Dimensions & Advanced specsFuselage - Length663 mmFuselage - Stabilizer Angle-2,3°Fuselage - MaterialAluminumFuselage - Surface TreatmentDeep AnodizationFuselage - Weight (ca.)858 gFuselage - Mast Connection SystemR8Fuselage - Front Wing Connection TypeT8
Hardware Kit Alu Plate (P02K) to Rail Board Countersunk Hex Screws M8x30 x 4 Conical Washers x 4 Truck Nuts M8 x 4 Hardware Kit to connect aluminum plate P02K to Rail Boards (Kraken Modular System).